Canyon River Cellular - accessory item 811101

811101
824-894 MHz
Direct connection (connects to wireless phone with antenna cable, not included but required)
Cellular in-car single band wireless bi-directional amplifier
Includes 12 volt DC Cigarette adapter.

Frequency:                     824-894 MHz
Gain (up/down):           Cell Site Controlled
Linear Output Power:     +30dBm
Max Output Power:        3 watts
Max RF (up / down):      +35 dBM / + 10 dBm
Noise Figure (down):      3dB nominal
Flatness (up / down):       +/- 4dB / +/- 6dB
Isolation:                         Uplink/Downling more than 90 dB
Power requirements:       13.5V, 1.5A
Connectors:                    FME male 50 Ohms
Dimensions:                    5.5x4.3x1.4 (inch)
Weight:                          1.32 lbs.

ordering part numbers:
811101 Amplifier unit, dual band 800 mhz, in car $ 199.77

signal amplifier unit

Wilson Bi-Directional Cellular Amps

Wilson Cellular in-car wireless amplifiers feature advanced electronics that allow you to receive and transmit better than your cellphone.

Significantly increases your cellphone's range on send and receive
Connects directly to phone with antenna cable (not included)
Extends the life of your cellphone's battery
Uplink/Downlink overload protected
Rx/TX overload and low isolation indicator lights
Adequate outdoor signal strength of -70 to -90 dBm is required for optimum system performance.
FCC type accepted
Requires indoor and outdoor antennas, cable and connectors

Original Aftermarket Brand Product (AM)
manufacture: Wilson Cellular Inc. ( WEI ) *
warranty: limited 90 day
all prices subject to change

spec's from Wilson Electronics web site

Canyon River Cellular Company * sales@canyonriver.com

Page last revised on: 04/29/05

Wilson Electronics Inc., Wilson Cellular Inc., logo, products are registered trademarks of Wilson Electroincs Inc. and/or its affiliates.
Manufactures, the manufactures products and their logos are registered trademarks of each Manufacture and/or its affiliates.