Canyon River Cellular - accessory item 814001

814001
806-866 MHz
Direct connection (connects to wireless phone with antenna cable, not included but required)
iDEN in-car single band wireless bi-directional amplifier
Includes 12 volt DC power supply.

Frequency:                     806-866 MHz
Gain (up/down):           10dB / 10 dB
Linear Output Power:     +30dBm
Max Output Power:        3 watts
Max RF (up / down):      +35 dBM / + 5 dBm
Noise Figure (down):      3.5dB nominal
Flatness (up / down):       +/- 2dB / +/- 2dB
Isolation:                         Uplink/Downling more than 90 dB
Power requirements:       12V, 1.5A
Connectors:                    FME male 50 Ohms
Dimensions:                    5.5x4.3x1.4 (inch)
Weight:                          1.32 lbs.

ordering part numbers:
814001 Amplifier unit, single band 800 mhz, in car $ 209.77

signal amplifier unit

Wilson Bi-Directional iDEN Amps

Wilson Cellular in-car wireless amplifiers feature advanced electronics that allow you to receive and transmit better than your cellphone.

Significantly increases your cellphone's range on send and receive
Connects directly to phone with antenna cable (not included)
Extends the life of your cellphone's battery
Uplink/Downlink overload protected
Rx/TX overload and low isolation indicator lights
Adequate outdoor signal strength of -70 to -90 dBm is required for optimum system performance.
FCC type accepted
Requires indoor and outdoor antennas, cable and connectors

Original Aftermarket Brand Product (AM)
manufacture: Wilson Cellular Inc. ( WEI ) *
warranty: limited 90 day
all prices subject to change

spec's from Wilson Electronics web site

Canyon River Cellular Company * sales@canyonriver.com

Page last revised on: 04/20/05

Wilson Electronics Inc., Wilson Cellular Inc., logo, products are registered trademarks of Wilson Electroincs Inc. and/or its affiliates.
Manufactures, the manufactures products and their logos are registered trademarks of each Manufacture and/or its affiliates.